Cosmetic containers come in four families: caps and closures; pumps and sprayers; makeup parts; and bottles and jars. Each part is chosen by its neck, its dose or its finish. Caps and pumps are matched to the bottle by neck size, pumps also by how much they give per stroke, and makeup parts by the finish the shopper sees.
| Family | What is in it | Chosen by | Numbers to know |
|---|---|---|---|
| Caps & closures | Screw caps, flip-top, disc-top, dosing caps, child-resistant closures, tamper-evident bands | Neck size | Screw caps: 18/410, 20/410, 24/410, 28/410, 28/400, 33/400, 38/400 |
| Pumps & sprayers | Lotion pump (shampoo / soap pump), cream pump, foam pump, airless pump, trigger sprayer, fine mist sprayer | Neck size and dose (airless: capacity) | Lotion pump 2 cc or 4 cc; cream pump about 1 cc |
| Makeup packaging | Compacts, cushion compacts, lipstick tubes, mascara tubes, droppers | Finish | Compact pans: round 36 to 59 mm, square 47 and 56 mm; cushion inner pans 62 to 70 mm |
| Bottles & jars | HDPE, PET and PP bottles, PETG double-wall jars and cosmetic jars | Material and neck (jars: diameter) | HDPE 24/410, 28/410, 28/400, 38/400 · PET 24/410 · PP jar 58 mm |
Chosen by the neck on the bottle. Our neck finish chart lists every cap against every neck it comes in. Ask about this one →
Chosen by neck and by dose. A lotion pump gives 2 cc or 4 cc a stroke, a cream pump about 1 cc; an airless pump is sized by capacity instead of a neck. See airless pump vs lotion pump for how the two main pumps differ. Ask about this one →
On a shampoo cap you look at the neck size; on a compact, you look at the finish. Finishes and decoration: metallized, hot stamping, matte / soft touch, pad printing, silk screen, UV coating and color matching. Two-shot moulding puts two colors into one part. The numbers that matter are the pan sizes: round pans 36 to 59 mm and square 47 and 56 mm for compacts, inner pans 62 to 70 mm for cushion compacts. Ask about this one →
HDPE, PET and PP bottles, PETG double-wall jars and cosmetic jars. HDPE bottles are made by extrusion blow moulding and PET bottles by injection stretch blow moulding. HDPE comes in 24/410, 28/410, 28/400 and 38/400, PET in 24/410, and our PP jar in 58 mm. See HDPE vs PET vs PP for choosing the material. Ask about this one →
Caps, pumps and makeup parts are injection moulded in Morocco; the bottles are blown in our own factory. They match the necks of the caps and pumps we supply.
Start with what the part is judged by. For a cap or a pump, that is the neck on your bottle — look it up on the neck finish chart or send us a photo. For a pump, add the dose per stroke. For a makeup part, it is the finish and, for compacts, the pan size.
Please fill in the required fields: your name, your email or WhatsApp, and what you need.
Something went wrong. Please try again.
The form is temporarily unavailable — please write to us on WhatsApp.
One of your files could not be accepted. Please check the type and the size (25 MB per file, 40 MB in total) and send again — your other details are still filled in.
Too many files were sent from this connection in the last hour. Please try again later, or write to us on WhatsApp.
Your files are too large for our server to receive. Please send fewer or smaller files, or send them on WhatsApp — your other details are still filled in.
Four families: caps and closures, pumps and sprayers, makeup packaging, and bottles and jars. Caps and pumps are chosen by the neck size of the bottle, pumps also by the dose per stroke, makeup parts by their finish, and bottles by material and neck, jars by diameter. All of them are made in Morocco.
By what the part is judged on: the neck size for caps and pumps, the dose per stroke for pumps, and the finish for makeup parts. Start with the neck on your bottle — look it up on our neck finish chart or send us a photo — then add the dose or the finish you want.
Round pans from 36 to 59 mm and square pans of 47 and 56 mm. Cushion compacts take inner pans of 62 to 70 mm. Tell us the pan you fill, or send a photo of a reference compact, and we’ll quote the compact to match your pan and your finish.
The minimum order is 10,000 pcs, for caps and pumps as well as compacts and lipstick tubes. Lead time is 7–25 days on an existing mould and 30–60 days on a new one. Tell us the part and send a photo or a reference sample. Get an exact quote within 24–48 hours.
A photo of your current bottle or pump is enough. You do not need to know the reference numbers.
